Read and write LIS data direct from tape or a downloaded tape image file (.tif file)
EZLIS transfers log data from Schlumberger's LIS tape format to an ASCII file suitable for import to various Log Analysis Systems. EZLIS provides access to all of the data on an LIS tape as specified by Schlumberger in their manual Log Information Standard, Customer Tape Subset dated October 1981. This form-driven application program is built around Oilware's time proven data access libraries LIS/PAK and ASC/PAK.
Features
- Full screen, menu driven user interface, with context sensitive help
- Scan with Verification Report from Magnetic tape or Western Atlas TIF (Tape Image Format) Files
- The tape files, depth interval from each tape file, and curves from each tape file may be defaulted or selected interactively.
- Copy magnetic tapes to Tape Image Disk Files for later conversion, or conversion on a machine without a tape drive.
- Directly produce ASCII Files in the Log ASCII Standard (LAS) Format, Hydrocarbon Data Systems, or any user definable ASCII format via Format Definition Files.
- Edit default curve selection files from within EZLIS.
- Program Defaults and Operational Parameters (such as tape controller interface address on the PC) may be set via configuration files.
- Optionally output an LIS formatted tape or Tape Image File which is a subset of the input LIS tape or Tape Image File.
Required Hardware for PC Usage
- 80x86 or Pentium based Computer 550K Free CPU Memory
- MS-DOS 3.0 or Higher Hard Disk Drive
Required Hardware to Write Magnetic Tape Directly
- Overland Data TC-50M, TX-8, or TXi-16 Tape Controller Interface, Catamount ATC-8 or ATC-16 Tape Controller Interface, MicroTech Conversion Systems, IDT Leo, or AKSystems PCI-100 Tape Controller Interface.
- 9-Track Magnetic Tape Drive with Formatter
